Drum Section; Detaching And Refitting The Drum Unit - Kyocera KM-2560 Service Manual

1-5-4

Drum section

(1) Detaching and refitting the drum unit

Follow the procedure below to replace the drum unit.
Cautions
Avoid direct sunlight or strong light when detaching and refitting the drum unit.
Never touch the drum surface when holding the drum unit.
Procedure
1. Open the left cover 1.
2. Open the front cover.
3. Remove the toner container.
4. Remove the waste toner box.
5. Remove the claw and remove the toner hop-
per wire cover.
6. Remove the connector.
7. Remove three screws.
8. Remove the toner hopper assembly.
Toner hopper
wire cover
Toner hopper
wire cover
Screw
Screw
Toner hopper
Screw
assembly
Claw
Figure 1-5-64
Connector
Figure 1-5-65
2H0/2HZ
1-5-35