2HJ/2HK
2-1-5
Secondary transfer and separation section
The secondary transfer and separation section includes the secondary transfer roller which is installed on the paper feed
unit. The secondary transfer roller is applied by the bias high voltage PWB of DC bias. The image constituted by toner on
the primary transfer belt is transferred on paper by means of the difference in potential. The paper is separated from the
transfer belt as the curvature radius of the secondary transfer roller is considerably small.
2-1-24
Downloaded from
www.Manualslib.com
Feed base
(Paper feed unit)
To
fuser unit
Figure 2-1-33Secondary transfer unit
manuals search engine
Paper chute
Secondary transfer roller
Figure 2-1-32
Transfer roller gear
Secondary transfer roller
Feed base
(Paper feed unit)