Mass Air Flow And Intake Air Temperature Sensor - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

Mass Air Flow and Intake Air Temperature Sensor

FUEL INJECTION (FUEL SYSTEMS)

10.Mass Air Flow and Intake Air

Temperature Sensor

1) Disconnect the ground cable from battery.

2) Disconnect the connector from the mass air flow

and intake air temperature sensor, and remove the

mass air flow and intake air temperature sensor.

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

1 N·m (0.1 kgf-m, 0.7 ft-lb)

C: INSPECTION

1. CHECK THE MASS AIR FLOW SENSOR

1) Disconnect the ground cable from battery.

2) Remove the mass air flow and intake air temper-

ature sensor. <Ref. to FU(H4SO)-34, REMOVAL,

Mass Air Flow and Intake Air Temperature Sen-

3) Connect terminal No. 3 to the battery positive

terminal and terminal No. 4 to the battery ground

terminal, terminal No. 5 to the circuit tester positive

terminal and No. 4 to the circuit tester ground termi-

4) Check that the voltage changes when air is

blown to the mass air flow sensor unit from arrow

2. CHECK THE INTAKE AIR TEMPERATURE

Measure the resistance between intake air temper-

ature sensor terminals.

–20°C (–4°F)

60°C (140°F)

3. OTHER INSPECTIONS

Check the mass air flow and intake air temperature

sensor for damage or dirt.

Terminal No.

0.580 0.087 k