Subaru 2009 IMPREZA Service Manual page 164

3) Remove the rear exhaust pipe and muffler.
<Ref. to EX(H4SO)-10, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H4SO)-12, REMOVAL, Muf-
fler.>
4) Remove the rear sub frame. <Ref. to RS-17, RE-
MOVAL, Rear Sub Frame.>
5) Open the fuel filler lid and remove the fuel filler
cap.
6) Drain the fuel from the fuel filler pipe through the
filler opening using the gasoline proof pump and
the gasoline proof hose (ø10 or less).
7) Disconnect the fuel filler hose (A) from the fuel
filler pipe assembly.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
(A)
(A) Fuel filler hose
(B) Evaporation hose
8) Set the container under the vehicle and insert
the gasoline proof hose (ø10 or less) into the fuel
filler hose to drain the fuel.
CAUTION:
Be careful not to spill fuel.
9) Install the related parts in the reverse order after
draining the fuel.
Tightening torque:
2.5 N·m (0.3 kgf-m, 1.8 ft-lb)
(B)
FU-03422
FU(H4SO)-53
Fuel
FUEL INJECTION (FUEL SYSTEMS)
• 5 DOOR MODEL
WARNING:
Place "NO OPEN FLAMES" signs near the
working area.
CAUTION:
• Be careful not to spill fuel.
• Fuel may remain in the fuel filler pipe. Drain-
ing the fuel from the fuel filler pipe through the
fill opening using the gasoline proof pump and
the gasoline proof hose (ø10 or less) before the
operation.
1) Set the vehicle on a lift.
2) Lift up the vehicle.
3) Remove the rear exhaust pipe and muffler.
<Ref. to EX(H4SO)-10, REMOVAL, Rear Exhaust
Pipe.> <Ref. to EX(H4SO)-12, REMOVAL, Muf-
fler.>
4) Open the fuel filler lid and remove the fuel filler
cap.
5) Drain the fuel from the fuel filler pipe through the
filler opening using the gasoline proof pump and
the gasoline proof hose (ø10 or less).
6) Disconnect the fuel filler hose from the fuel filler
pipe assembly.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
7) Set the container under the vehicle and insert
the gasoline proof hose (ø10 or less) into the fuel
filler hose to drain the fuel.
CAUTION:
Be careful not to spill fuel.
8) Install the related parts in the reverse order after
draining the fuel.
Tightening torque:
2.5 N·m (0.3 kgf-m, 1.8 ft-lb)
FU-03353