asieps_tobira_IM_US.book 35 ページ 2012年1月17日 火曜日 午後3時48分
Mass Air Flow and Intake Air Temperature Sensor
FUEL INJECTION (FUEL SYSTEMS)
9. Mass Air Flow and Intake Air
Temperature Sensor
A: REMOVAL
1) Disconnect the ground cable from the battery.
FU-00009
2) Disconnect the connector from the mass air flow
and intake air temperature sensor.
3) Remove the mass air flow and intake air temper-
ature sensor.
FU-00067
B: INSTALLATION
Install in the reverse order of removal.
Tightening torque:
1.0 N·m (0.1 kgf-m, 0.7 ft-lb)
FU(H4DOTC)-35