Subaru 2009 IMPREZA Service Manual page 170

9) Connect the connector to the rear ABS wheel
speed sensor.
10) Install the heat shield cover.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
11) Install the fuel tank protector.
Tightening torque:
Nut: 9 N·m (0.9 kgf-m, 6.6 ft-lb)
Bolt: 18 N·m (1.8 kgf-m, 13.3 ft-lb)
12) Install the propeller shaft. <Ref. to DS-11, IN-
STALLATION, Propeller Shaft.>
13) Install the rear exhaust pipe and muffler. <Ref.
to EX(H4SO)-10, INSTALLATION, Rear Exhaust
Pipe.> <Ref. to EX(H4SO)-12, INSTALLATION,
Muffler.>
14) Lower the vehicle.
15) Connect the parking brake cable to the parking
brake assembly. <Ref. to PB-7, INSTALLATION,
Parking Brake Assembly (Rear Disc Brake).>
16) Install the rear disc brake assembly.
Tightening torque:
66 N·m (6.7 kgf-m, 48.7 ft-lb)
Fuel Tank
17) Install the rear brake hose bracket to the rear
housing.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
FU-03277
18) Attach the rear ABS wheel speed sensor to the
rear housing.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
19) Install the rear wheels.
Tightening torque:
100 N·m (10.2 kgf-m, 73.8 ft-lb)
20) Connect the quick connector of the fuel delivery
tube (A). <Ref. to FU(H4SO)-77, INSTALLATION,
Fuel Delivery and Evaporation Lines.>
FU-04153
FU(H4SO)-59
FUEL INJECTION (FUEL SYSTEMS)
(A)
FU-04088
FU-03357
FU-03275