Subaru 2009 IMPREZA Service Manual page 203

8. Fuel Temperature Sensor
A: REMOVAL
The fuel temperature sensor and fuel level sensor
are integrated into one unit; therefore, refer to "Fuel
Level Sensor" for removal procedure. <Ref. to
FU(H4SO)-67, REMOVAL, Fuel Level Sensor.>
(A)
(A) Fuel temperature sensor
B: INSTALLATION
The fuel temperature sensor and fuel level sensor
are integrated into one unit; therefore, refer to "Fuel
Level Sensor" for installation procedure. <Ref. to
FU(H4SO)-67, INSTALLATION, Fuel Level Sen-
sor.>
(A)
(A) Fuel temperature sensor
Fuel Temperature Sensor
EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES)
C: INSPECTION
Measure the resistance between fuel temperature
sensor terminals.
CAUTION:
When measuring the resistance, check the cir-
cuit tester specification and be careful not to
turn on electricity 3 V or more to prevent dam-
aging the fuel temperature sensor.
EC-02473
Temperature
–10°C (14°F)
20°C (68°F)
50°C (122°F)
EC-02473
EC(H4SO)-13
1 2
3 4
Terminal No. Standard
11.21 0.69 k
(measured current 0.10 mA)
2.502 0.08 k
2 and 3
(measured current 0.10 mA)
0.7176 0.034 k
(measured current 0.10 mA)
EC-02452