Subaru 2009 IMPREZA Service Manual page 406

Hide thumbs Also See for 2009 IMPREZA:

STARTING/CHARGING SYSTEMS

8) Attach the armature assembly and yoke assem-

bly to the starter housing assembly together as a

single unit.

As shown in the figure, match the protrusion of the

yoke assembly to the cut out of the starter housing

9) Use an appropriate tool (such as correctly sized

socket wrenches) and attach the brush holder as-

sembly to the armature assembly.

Be careful not to damage the brushes.

10) Secure starter cover assembly to the brush

holder assembly with screws (A).

Tightening torque:

1.4 N·m (0.1 kgf-m, 1.0 ft-lb)

11) Install through bolts (B) on both sides.

Tightening torque:

6 N·m (0.6 kgf-m, 4.4 ft-lb)

12) Attach the magnet switch assembly to the start-

er housing assembly.

Tightening torque:

7.5 N·m (0.8 kgf-m, 5.5 ft-lb)

13) Attach the cable to the M terminal of the mag-

net switch assembly, and secure with nuts.

Tightening torque:

10 N·m (1.0 kgf-m, 7.4 ft-lb)