Subaru 2009 IMPREZA Service Manual page 301

Hide thumbs Also See for 2009 IMPREZA:

28) Use the ST to lock the crankshaft, and install

the drive plate. (AT model)

ST 498497100

CRANKSHAFT STOPPER

Tightening torque:

72 N·m (7.3 kgf-m, 53.1 ft-lb)

29) Install the flywheel. (MT model) <Ref. to CL-13,

INSTALLATION, Flywheel.>

30) Install the clutch disc and cover. (MT model)

<Ref. to CL-10, INSTALLATION, Clutch Disc and

31) Install the oil pump.

(1) Using the ST, install the front oil seal.

ST 499587100

OIL SEAL INSTALLER

Use a new front oil seal.

Cylinder Block

(2) Apply liquid gasket to the mating surfaces of

Install within 5 min. after applying liquid gasket.

Liquid gasket:

THREE BOND 1217G (Part No. K0877Y0100)

or equivalent

(3) Apply a coat of engine oil to the inside of oil

(4) Install the oil pump to cylinder block. Be

careful not to damage the oil seal during instal-

• Make sure the oil seal lip is not folded.

• Align the flat surface of oil pump's inner rotor with

crankshaft before installation.

• Use new O-rings and oil seals.

• Do not forget to assemble O-rings.