Subaru 2009 IMPREZA Service Manual page 954

11) Install the throttle body to the intake manifold.
NOTE:
Use new O-rings.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
12) Connect the connector to the throttle position
sensor.
Intake Manifold
13) Connect the evaporation hose to purge control
solenoid valve 2.
NOTE:
Connect the evaporation hose as shown in the fig-
ure.
FU-03815
FU-03463
14) Connect the connectors to the wastegate con-
trol solenoid valve, manifold absolute pressure
sensor and purge control solenoid valve 2, and in-
stall the solenoid valve bracket assembly to the in-
take manifold.
Tightening torque:
T1: 17 N·m (1.7 kgf-m, 12.5 ft-lb)
T2: 19 N·m (1.9 kgf-m, 14.0 ft-lb)
FU(H4DOTC)-29
FUEL INJECTION (FUEL SYSTEMS)
(A)
(c) (a)
(B)
(b)
(c)
(A) Purge control solenoid valve 1
(B) Purge control solenoid valve 2
(a) To intake manifold
(b) To intake duct
(c) To fuel pipe
T2
T1
EC-02201
EC-02252