Subaru 2009 IMPREZA Service Manual page 295

4) Apply a coat of engine oil to the washer and bolt
thread.
NOTE:
Use a new seal washer.
5) Tighten the 10 mm cylinder block connecting
bolts on the LH side (A — D) in alphabetical order.
Tightening torque:
10 N·m (1.0 kgf-m, 7.4 ft-lb)
(D)
(B)
6) Tighten the 10 mm cylinder block connecting
bolts on the RH side (E — J) in alphabetical order.
Tightening torque:
10 N·m (1.0 kgf-m, 7.4 ft-lb)
(E)
(G)
(I)
(F)
7) Tighten the LH side cylinder block connecting
bolts (A — D) further in alphabetical order.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
(D)
(B)
Cylinder Block
(A)
(C)
ME-00840
(J)
(H)
ME-00841
(A)
(C)
ME-00840
ME(H4SO)-77
8) Tighten the RH side cylinder block connecting
bolts (E — J) further in alphabetical order.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
(E)
(G)
(I)
(F)
9) Tighten the LH side cylinder block connecting
bolts (A — D) further in alphabetical order.
• (A), (C): Angle tightening
Tightening angle:
90°
• (B), (D): Torque tightening
Tightening torque:
40 N·m (4.1 kgf-m, 29.5 ft-lb)
(D)
(B)
10) Tighten the RH side cylinder block connecting
bolts (E — J) further in alphabetical order.
Tightening angle:
90°
(E)
(G)
(I)
(F)
MECHANICAL
(J)
(H)
ME-00841
(A)
(C)
ME-00840
(J)
(H)
ME-00841