Subaru 2009 IMPREZA Service Manual page 378

6) Tighten the bolts which install oil pan to cylinder
block.
Tightening torque:
T1: 5 N·m (0.5 kgf-m, 3.7 ft-lb)
T2: 6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
T3: 10 N·m (1.0 kgf-m, 7.4 ft-lb)
(D)
(C)
(B)
T3
(A)
T1
(A) Oil pan
(B) Oil strainer
(C) Baffle plate
(D) Cylinder block
7) Lower the engine onto front crossmember.
Oil Pan and Strainer
8) Tighten the nuts which install engine mounting
onto front crossmember.
NOTE:
Make sure that the engine mounting nuts (A) and
locator (B) are securely installed. (Turbo model)
Tightening torque:
• Non-turbo model
T2
• Turbo model
T2
T1
LU-02335
9) Install the front exhaust pipe. <Ref. to
EX(H4SO)-7, INSTALLATION, Front Exhaust
Pipe.> <Ref. to EX(H4DOTC)-7, INSTALLATION,
Front Exhaust Pipe.>
10) Install the under cover.
11) Lower the vehicle.
CAUTION:
When lowering the vehicle, lower the lift up de-
vice and wire ropes at the same time.
LU(H4SO)-17
85 N·m (8.7 kgf-m, 62.7 ft-lb)
(A) (B)
(B) (A)
LUBRICATION
LU-02470
ME-03704