Subaru 2009 IMPREZA Service Manual page 174

5) Tighten the bolts and nuts which hold fuel filler
pipe bracket on the body.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
6) Install the rear sub frame. <Ref. to RS-18, IN-
STALLATION, Rear Sub Frame.>
7) Install the rear mud guard RH. <Ref. to EI-28, IN-
STALLATION, Mud Guard.>
8) Lower the vehicle.
9) Install the rear wheel RH.
Tightening torque:
100 N·m (10.2 kgf-m, 73.8 ft-lb)
10) Connect the ground cable to battery.
11) Inspect the wheel alignment and adjust if nec-
essary.
Fuel Filler Pipe
C: DISASSEMBLY
1) Remove the shut valve from the fuel filler pipe.
<Ref. to EC(H4SO)-18, REMOVAL, Shut Valve.>
2) Remove the evaporation pipe from the fuel filler
pipe.
FU-03426
IN-00203
FU(H4SO)-63
FUEL INJECTION (FUEL SYSTEMS)
FU-03428