Accelerator Pedal - Subaru 2009 IMPREZA Service Manual

Hide thumbs Also See for 2009 IMPREZA:

SPEED CONTROL SYSTEMS

2. Accelerator Pedal

1) Disconnect the ground cable from battery.

2) Disconnect the connector (A).

3) Remove the nut (B) securing accelerator pedal

B: INSTALLATION

Install in the reverse order of removal.

Tightening torque:

18 N·m (1.8 kgf-m, 13.3 ft-lb)

C: DISASSEMBLY

The accelerator pedal cannot be disassembled.

Accelerator Pedal

D: INSPECTION

1) Check for smooth operation when the accelera-

tor pedal is depressed.

2) Check if the accelerator pedal returns to its orig-

inal position smoothly when the pedal is released.

1. ACCELERATOR PEDAL SENSOR

(METHOD WITH CIRCUIT TESTER)

1) Remove the lower inner trim of passenger's

<Ref. to EI-55, REMOVAL, Lower Inner Trim.>

2) Turn over the floor mat of passenger's seat.

3) Remove the protect cover.

4) Remove the nuts and bolts which hold the ECM

to the bracket.

5) Turn the ignition switch to ON. (engine OFF)