Subaru 2009 IMPREZA Service Manual page 402

Hide thumbs Also See for 2009 IMPREZA:

STARTING/CHARGING SYSTEMS

C: DISASSEMBLY

1) Remove the nuts fastening the M terminal of the

magnet switch assembly, and disconnect the cable

from the M terminal.

2) Remove the screws fastening the magnet switch

assembly, then remove the magnet switch assem-

bly from the starter housing assembly.

3) Remove screws (A) of the brush holder assem-

bly, and through bolts (B) on both sides, and re-

move the starter cover assembly.

4) Remove the brush holder assembly from the ar-

mature assembly.

Hold the brush with your fingers so that the brush

spring does not come flying out.

5) Remove the armature assembly and yoke as-

sembly from the starter housing assembly together

as a single unit.

6) Separate the armature assembly and yoke as-

7) Remove the pinion gear from the internal gear