Subaru 2009 IMPREZA Service Manual page 390

Hide thumbs Also See for 2009 IMPREZA:

General Description

• Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing

• Remove contamination including dirt and corrosion before removal, installation or disassembly.

• Keep the disassembled parts in order and protect them from dust and dirt.

• Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, in-

stallation, disassembly and replacement.

• Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.

• Be sure to tighten fasteners including bolts and nuts to the specified torque.

• Place shop jacks or rigid racks at the specified points.

• Before disconnecting connectors of sensors or units, be sure to disconnect the ground cable from the bat-

D: PREPARATION TOOL

1. GENERAL TOOL

Circuit tester

Used for measuring resistance.