Subaru 2009 IMPREZA Service Manual page 173

FUEL INJECTION (FUEL SYSTEMS)
B: INSTALLATION
1) Open the fuel filler lid.
2) Set the fuel saucer (A) with rubber gasket (C),
and insert the fuel filler pipe into hole from the inner
side of apron.
3) Align the holes in fuel filler pipe neck and set the
cup (B), and tighten the screws.
NOTE:
If the edges of rubber gasket are folded toward in-
side, straighten it with a flat tip screwdriver.
Fuel Filler Pipe
(A)
(B)
(C)
FU-00103
FU(H4SO)-62
4) Securely insert the fuel filler hose (A) and evap-
oration hose (B) into the specified position, then at-
tach the clamp or clip as shown in the figure.
Tightening torque:
2.5 N·m (0.3 kgf-m, 1.8 ft-lb)
(A)
( 1 )
(1) Hose
(2) Clamp or clip
(3) Pipe
(B)
(B)
FU-03427
( 2 )
( 3 )
L/2
L
FU-00104