Subaru 2009 IMPREZA Service Manual page 948

11) Connect the connector to the secondary air
combination valve.
12) Install the engine harness connector to engine
harness bracket, then connect the bulkhead har-
ness connector to the engine harness connector.
13) Connect the air control hose (A) to the waste-
gate actuator, and install the turbocharger to the in-
take duct.
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
• Except for WRX-SS model
Intake Manifold
• WRX-SS model
14) Connect the brake booster vacuum hose.
FU-03901
15) Connect the PCV hose to the rocker cover.
NOTE:
Use a new clamp for the PCV hose clamp, fit the
cut out in the ST with the protrusion on the clamp as
shown in the figure, and lock the clamp.
ST 18353AA000 CLAMP PLIERS
ME-03625
16) Connect the engine coolant hoses to throttle
body.
(A)
IN-02454
FU(H4DOTC)-23
FUEL INJECTION (FUEL SYSTEMS)
(A)
ME-03898
FU-03116
FU-03814
IN-02567