Subaru 2009 IMPREZA Service Manual page 188

9) Disconnect the quick connector, and disconnect
the fuel delivery tube and jet pump tube.
(1) Push the retainer in the direction of the ar-
row, disconnect the quick connector from pipe.
NOTE:
Clean the pipe and quick connector, if they are cov-
ered with dust.
( A )
(A) Quick connector
(B) Retainer
(C) Pipe
(2) To prevent from damaging or entering for-
eign matter, wrap the pipes and quick connec-
tors with plastic bag etc.
10) Remove the evaporation pipe.
(1) Remove the rear mud guard RH. <Ref. to
EI-28, REMOVAL, Mud Guard.>
(2) Remove the evaporation hose.
(3) Remove the right side trunk side trim. (4
door model) <Ref. to EI-61, REMOVAL, Trunk
Room Trim.>
Fuel Delivery and Evaporation Lines
( B )
( C )
FU-00124
FU-01333
FU-04305
FU(H4SO)-77
FUEL INJECTION (FUEL SYSTEMS)
(4) Remove the right side rear quarter trim. (5
door model) <Ref. to EI-58, REMOVAL, Rear
Quarter Trim.>
(5) Remove the evaporation pipe protector.
(6) Remove the evaporation pipe from vehicle.
B: INSTALLATION
Install in the reverse order of removal while being
careful of the following.
1. EVAPORATION PIPE INSTALLATION
1) Install the evaporation pipe to the vehicle.
2) Install the evaporation pipe protector.
FU-04306
FU-04307
FU-04307
FU-04306