Subaru 2009 IMPREZA Service Manual page 401

2. Starter
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Remove the air intake chamber. (Non-turbo
model) <Ref. to IN(H4SO)-7, REMOVAL, Air Intake
Chamber.>
3) Remove the intercooler. (Turbo model) <Ref. to
IN(H4DOTC)-13, REMOVAL, Intercooler.>
4) Remove the air intake chamber stay LH. (Non-
turbo model)
• MT MODEL
• AT MODEL
Starter
5) Disconnect the connector (B) and terminal (A)
from starter.
6) Remove the starter from transmission.
IN-00203
NOTE:
For the MT model, a bolt is used in place (A).
B: INSTALLATION
Install in the reverse order of removal.
NOTE:
For the MT model, a bolt is used in place (A).
Tightening torque:
SC-00176
50 N·m (5.1 kgf-m, 36.9 ft-lb)
SC-00177
SC(H4SO)-7
STARTING/CHARGING SYSTEMS
SC-00006
(A)
SC-00184
(A)
SC-00184