Subaru 2009 IMPREZA Service Manual page 253

12) Lift up the vehicle.
13) Install the bolts and nuts which hold lower side
of the transmission to engine.
Tightening torque:
50 N·m (5.1 kgf-m, 36.9 ft-lb)
• AT MODEL
• MT MODEL
14) Install the nuts which hold the engine mounting
to the crossmember.
Tightening torque:
85 N·m (8.7 kgf-m, 62.7 ft-lb)
Engine Assembly
15) Connect the ground cable.
Tightening torque:
7.5 N·m (0.8 kgf-m, 5.5 ft-lb)
AT-00108
16) Install the front and center exhaust pipe. <Ref.
to EX(H4SO)-7, INSTALLATION, Front Exhaust
Pipe.>
MT-00077 17) Lower the vehicle.
18) Connect the following hoses.
(1) Fuel delivery hose and evaporation hose
(2) Heater inlet and outlet hoses
(3) Brake booster vacuum hose
19) Connect the following connectors and termi-
nals.
(1) Front oxygen (A/F) sensor connector
(2) Rear oxygen sensor connector
(3) Engine harness connectors
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
LU-02470
(4) Generator connector and terminal
Tightening torque:
15 N·m (1.5 kgf-m, 11.1 ft-lb)
(5) A/C compressor connector
ME(H4SO)-35
MECHANICAL
ME-03376
ME-03377
FU-03924