Subaru 2009 IMPREZA Service Manual page 949

FUEL INJECTION (FUEL SYSTEMS)
17) Install the duct to the throttle body.
Tightening torque:
3 N·m (0.3 kgf-m, 2.2 ft-lb)
18) Attach the bolts which secure the air by-pass
pipe and PCV pipe to the intake manifold.
Tightening torque:
6.4 N·m (0.7 kgf-m, 4.7 ft-lb)
19) Attach the connector to the PCV hose assem-
bly.
20) Connect the vacuum hose (A) and the connec-
tor (B) to the PCV hose assembly.
21) Install the A/C pressure hoses to A/C compres-
sor. <Ref. to AC-38, INSTALLATION, Hose and
Pipe.>
22) Install the coolant filler tank. <Ref. to
CO(H4DOTC)-30, INSTALLATION, Coolant Filler
Tank.>
23) Install the generator. <Ref. to SC(H4SO)-16,
INSTALLATION, Generator.>
Intake Manifold
FU-03028
FU-03899
(A)
(B)
FU-03898
FU(H4DOTC)-24
24) Install the intercooler. <Ref. to IN(H4DOTC)-
13, INSTALLATION, Intercooler.>
25) Install the air intake boot.
Tightening torque:
2.5 N·m (0.3 kgf-m, 1.8 ft-lb)
26) Install the air
IN(H4DOTC)-11, INSTALLATION,
Duct.>
27) Connect the ground cable to battery.
28) Lift up the vehicle.
29) Install the under cover.
30) Lower the vehicle.
31) Install the V-belt cover.
Tightening torque:
13 N·m (1.3 kgf-m, 9.6 ft-lb)
32) Fill engine coolant. <Ref. to CO(H4DOTC)-14,
FILLING OF ENGINE COOLANT, REPLACE-
MENT, Engine Coolant.>
33) Charge the A/C system with refrigerant. <Ref.
to AC-22, PROCEDURE, Refrigerant Charging
Procedure.>
IN-02475
intake duct. <Ref.
Air Intake
IN-00203
ME-03386
to