Subaru 2009 IMPREZA Service Manual page 56

PRE-DELIVERY INSPECTION
22.SECURITY SYSTEM
Check that the security system operates as indicat-
ed below.
1) Fully open all the door windows.
2) Remove the key from the ignition switch and
close all the doors including rear gate.
3) Press the "LOCK/ARM" button on the keyless
transmitter once.
4) If all doors lock, buzzer sounds once, the hazard
light flashes once, and the security display light
flashes as indicated below, the alarm system is in
the monitoring condition.
• Alarm system monitoring prepared condition
(A)
(B)
(A) Light ON
(B) Light OFF
(C) 2 seconds
Pre-delivery Inspection
PI-00357
PI-00504
(C)
PI-00315
5) Check that the system enters monitoring condi-
tion 30 seconds after the condition in 4).
• Alarm system monitoring condition (all models)
(A)
(B)
(A) Light ON
(B) Light OFF
(C) 2 seconds
6) Press the "UNLOCK/DISARM" button on the
keyless transmitter once.
PI-12
(C)
PI-00265
PI-00358