Subaru 2009 IMPREZA Service Manual page 250

MECHANICAL
19) Remove the nuts which secure the engine
mounting to the front crossmember.
20) Separate the torque converter clutch from the
drive plate. (AT model)
(1) Lower the vehicle.
(2) Remove the service hole plug.
(3) Insert the wrench into the crank pulley bolt
and rotate the crank pulley to remove the bolts
which hold torque converter clutch to drive
plate.
21) Remove the pitching stopper.
22) Disconnect the fuel delivery hose (A) and evap-
oration hose (B).
(1) Disconnect the quick connector of the fuel
delivery hose by pushing the ST in the direction
of the arrow.
ST 42099AE000 QUICK CONNECTOR
RELEASE
Engine Assembly
(2) Remove the clip and disconnect the evapo-
ration hose from the pipe.
CAUTION:
• Be careful not to spill fuel.
• Catch the fuel from hoses using a container
or cloth.
LU-02470
23) Support the engine with a lifting device and
wire ropes.
ME-00212
24) Support the transmission with a garage jack.
CAUTION:
Be sure to always perform this work, in order to
prevent the transmission from lowering for its
own weight.
MT-00069
ME(H4SO)-32
(A)
(B)
(A) Fuel delivery hose
(B) Evaporation hose
(A) Transmission
(B) Garage jack
FU-02715
LU-00222
(A)
(B)
ME-00215