Subaru 2009 IMPREZA Service Manual page 380

Hide thumbs Also See for 2009 IMPREZA:

6. Oil Pressure Switch

1) Disconnect the ground cable from battery.

2) Remove the generator from the bracket. <Ref. to

SC(H4SO)-16, REMOVAL, Generator.>

3) Disconnect the terminal from oil pressure switch.

4) Remove the oil pressure switch.

Oil Pressure Switch

B: INSTALLATION

1) Apply liquid gasket to the oil pressure switch

Liquid gasket:

THREE BOND 1324 (Part No. 004403042) or

2) Install the oil pressure switch to cylinder block.

Tightening torque:

25 N·m (2.5 kgf-m, 18.4 ft-lb)

3) Connect the terminal to the oil pressure switch.