Subaru 2009 IMPREZA Service Manual page 465

Hide thumbs Also See for 2009 IMPREZA:

Inspection Mode

ENGINE (DIAGNOSTICS)

9) Place the select lever or shift lever in D position

(AT model) or 1st gear (MT model) and drive the

vehicle at 5 to 10 km/h (3 to 6 MPH).

• For AWD model, release the parking brake.

• The speed difference between front and rear

wheels may light the ABS warning light, but this in-

dicates no malfunctions. When engine control diag-

nosis is finished, perform the ABS memory

clearance procedure of self-diagnosis system.

<Ref. to ABS(diag)-21, Clear Memory Mode.>

10) Using the general scan tool, check for DTC and

record the result(s).

• For detailed operation procedures, refer to the

general scan tool operation manual.

• For details concerning DTC, refer to "List of Diag-

nostic Trouble Code (DTC)".

<Ref. to EN(H4SO)(diag)-86, List of Diagnostic

Trouble Code (DTC).>

EN(H4SO)(diag)-48