Subaru 2009 IMPREZA Service Manual page 411

Hide thumbs Also See for 2009 IMPREZA:

C: DISASSEMBLY

1) Remove the four through-bolts.

2) Use a drier to heat the rear cover (A) portion to

50°C (122°F).

3) Insert the end of a flat tip screwdriver into the

gap between stator core and front cover. Pry them

apart to disassemble.

(A) Screwdriver

STARTING/CHARGING SYSTEMS

4) Using a vise, support the rotor and remove the

When holding the rotor with a vise, place alumi-

num plates or wooden pieces on the vise jaws

to prevent rotor from damage.

(A) Front cover

5) Use the following procedures to remove the ball

(1) Remove the bolt, and then detach the bear-

ing retainer.