Subaru 2009 IMPREZA Service Manual page 169

FUEL INJECTION (FUEL SYSTEMS)
4) Connect evaporation hose (B) to connector (A).
(B)
5) Tighten the bolts of the fuel tank band in the or-
der shown in the figure.
Tightening torque:
33 N·m (3.4 kgf-m, 24.3 ft-lb)
1
3
6) Install the rear suspension assembly.
WARNING:
A helper is required to perform this work.
(1) Support the rear differential with the trans-
mission jack.
(2) Support the rear suspension assembly, and
tighten the bolts which secure the rear suspen-
sion assembly to the body.
Tightening torque:
T1: 70 N·m (7.1 kgf-m, 51.6 ft-lb)
T2: 145 N·m (14.8 kgf-m, 106.9 ft-lb)
T2 T2
T1 T2
Fuel Tank
(A)
FU-03425
2
4
FU-03596
T2 T2
FU-03440
FU(H4SO)-58
(3) Install the rear shock absorber to the rear
suspension arm.
NOTE:
Use a new self-locking nut.
Tightening torque:
120 N·m (12.2 kgf-m, 88.5 ft-lb)
7) Connect canister drain hose (B) to canister drain
connector (A).
(B)
8) Install the parking brake cable clamp to the
body.
Tightening torque:
18 N·m (1.8 kgf-m, 13.3 ft-lb)
FU-03359
(A)
FU-03423
FU-03278