Subaru 2009 IMPREZA Service Manual page 971

FUEL INJECTION (FUEL SYSTEMS)
14.Oil Flow Control Solenoid
Valve
A: REMOVAL
Oil flow control solenoid valve is a unit with front
camshaft cap.
Refer to "Camshaft" for removal procedures. <Ref.
to ME(H4DOTC)-61, REMOVAL, Camshaft.>
B: INSTALLATION
Refer to "Camshaft" for installation procedure.
<Ref. to ME(H4DOTC)-62, INSTALLATION, Cam-
shaft.>
C: DISASSEMBLY
1) Remove the two mounting bolts securing oil re-
turn cover, and remove the oil return cover and
gasket.
2) Remove the bolt securing oil flow control sole-
noid valve, and remove the oil flow control solenoid
valve.
(D)
(C)
(A) Oil flow control solenoid valve
(B) Oil return cover
(C) Gasket
(D) Front camshaft cap
Oil Flow Control Solenoid Valve
(B)
(A)
FU-03158
FU(H4DOTC)-46
D: ASSEMBLY
1) Install the oil flow control solenoid valve.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
2) Apply liquid gasket to the two bolts securing oil
return cover.
Liquid gasket:
THREE BOND 1324 (Part No. 004403042) or
equivalent
3) Attach the oil return cover and gasket.
Tightening torque:
8 N·m (0.8 kgf-m, 5.9 ft-lb)
NOTE:
Use a new gasket.
(D)
(C)
(A) Oil flow control solenoid valve
(B) Oil return cover
(C) Gasket
(D) Front camshaft cap
E: INSPECTION
Measure the resistance between the oil flow control
solenoid valve terminals.
Terminal No.
1 and 2
(B)
(A)
FU-03158
EC-02428
Standard
7.4 0.5 (20°C (68°F))