Air Cleaner Element - Subaru 2009 IMPREZA Service Manual

PERIODIC MAINTENANCE SERVICES

10.Air Cleaner Element

A: REPLACEMENT
1. NON-TURBO MODEL
1) Disconnect the ground cable from battery.
2) Disconnect the connector (A) from the mass air
flow and intake air temperature sensor, and re-
move the clip (B).
3) Loosen the clamps (A) which connect the air
cleaner case to intake boot.
4) Remove the clip (B) securing the upper side of
air cleaner case.
(B)
Air Cleaner Element
IN-00203
(A)
(B)
IN-02470
(A)
IN-02471
PM-20
5) Remove the air cleaner case (rear) and air
cleaner element.
6) Install in the reverse order of removal.
CAUTION:
Be sure to use SUBARU genuine air cleaner el-
ement depending on the engine type when re-
placing the air cleaner elements. Using other air
cleaner element may affect the engine perfor-
mance.
NOTE:
• Check that there are no foreign objects in the air
cleaner case.
• When installing the air cleaner case (rear), align
the protrusion of the air cleaner case (rear) to the
hole on the air cleaner case (front) to install.
Tightening torque:
Clamp (A)
3 N·m (0.3 kgf-m, 2.2 ft-lb)
(B)
IN-02472
IN-02438
(A)
IN-02471