Subaru 2009 IMPREZA Service Manual page 47

Operation
14. Engine oil
15. Transmission gear oil
16. AT front differential oil
17. Engine coolant
18. Clutch fluid
19. Window washer fluid
20. Front hood latch
21. Keyless entry system
22. Security system
23. Seat
24. Seat belt
25. TPMS (U. S. model)
26. ECM protector
Checks with the Engine Running
Operation
27. Delivery (test) mode connector
28. Immobilizer
29. Starting condition
30. Exhaust system
31. Indicator and warning lights
32. Heater & ventilation
33. Air conditioner
34. Clock
35. Audio
36. Navigation
37. Front accessory power supply socket
38. Lighting system
39. Window washer
40. Wiper
41. Power window
42. Sunroof
43. Door mirror
Dynamic Test with the Vehicle Running
Operation
44. Brake test
45. Parking brake
46. AT shift control
47. Cruise control
Pre-delivery Inspection
Check the engine oil amount.
Check the transmission gear oil amount.
Check the AT front differential oil amount.
Check the engine coolant level.
Check the clutch fluid amount.
Check the window washer fluid amount.
Check that the front hood is closed normally and locked securely.
Check that the keyless entry system operates normally.
Check that the security system operates normally.
1. Check the seat surfaces for stains or dirt.
2. Check the seat installation conditions and functionality.
Check the seat belt installation conditions and functionality.
1. Turn the TPMS transmitter power supply to ON.
2. If the display of TPMS warning light does not operate normally, perform
the diagnosis by referring to TPMS (Diagnosis).
For Canada model, check the ECM protector installation conditions.
Turn the ignition switch to ON and check that the malfunction indicator light
starts blinking.
1. Check that the engine starts with all keys that are equipped on vehicle.
2. 60 seconds after turning ignition switch from ON to ACC or OFF, or imme-
diately after removing the key, check that the security indicator light is blinking.
Start the engine and check that the engine starts smoothly.
Check that the exhaust noise is normal and no leaks are found.
Check that all indicator lights and warning lights are operating correctly.
Check that the heater & ventilation system operates normally.
Check that the air conditioner operates normally.
Check that the clock operates normally.
Check the radio and AUX operate normally.
Check the navigation and AUX operate normally.
Check that the front accessory power supply socket operates normally.
Check that the lighting system operates normally.
Check that the window washer system operates normally.
Check that the wiper system operates normally.
Check that the power window operates normally.
Check that the sunroof operates normally.
Check that the remote control mirror operates normally.
Check the foot brake for normal operations.
Check the parking brake for normal operations.
Check that the AT shift patterns are correct.
Check that the cruise control system operates normally.
PI-3
PRE-DELIVERY INSPECTION
Check point
Check point
Check point