Subaru 2009 IMPREZA Service Manual page 270

Hide thumbs Also See for 2009 IMPREZA:

7) After ensuring the marks on timing belt and cam-

shaft sprockets are aligned, remove the stopper pin

from belt tension adjuster.

8) Install the timing belt guide. (MT model)

(1) Temporarily tighten the bolts mounting the

timing belt guide.

(2) Check and adjust the clearance between

timing belt and timing belt guide by using thick-

1.0 0.5 mm (0.039 0.020 in)

(3) Tighten the bolts mounting the timing belt

Tightening torque:

9.75 N·m (1.0 kgf-m, 7.2 ft-lb)

9) Install the timing belt cover. <Ref. to ME(H4SO)-

48, INSTALLATION, Timing Belt Cover.>

10) Install the crank pulley. <Ref. to ME(H4SO)-46,

INSTALLATION, Crank Pulley.>

11) Install the V-belts. <Ref. to ME(H4SO)-39, IN-

STALLATION, V-belt.>

C: INSPECTION

1. TIMING BELT

1) Check the timing belt teeth for breaks, cracks or

wear. If any fault is found, replace the timing belt.

2) Check the condition on the back surface of the

timing belt. If cracks are found, replace the timing

• Be careful not to let oil, grease or coolant

contact the timing belt. Remove quickly and

thoroughly if this happens.

• Do not bend the timing belt sharply.

In radial diameter h:

60 mm (2.36 in) or more