Top Of The Access Point; Leds - HP ProCurve 420 Installation And Getting Started Manual

Top of the Access Point

LEDs

Table 1-1.
Access Point State
LEDs
Power On
(green)
Off
Blinking*
Blinking*
(prolonged)
Access Point LEDs
Meaning
The access point is receiving power.
The access point is NOT receiving power.
The access point is undergoing self test or downloading software.
The self test and initialization are in progress after you have power cycled or reset
the access point. The access point is not operational until this LED stops blinking.
A component of the access point has failed its self test.
Introducing the hp procurve wireless AP 420 ww/na
hp procurve wireless AP 420 ww/na
Antennas
Top of the Access Point
Power,
10/100-T Link,
and Wireless
Link LEDs
1-3