Snmp-Server Trap Unauthorized-Ap Interval - HP ProCurve MSM310 Reference Manual

CLI commands
Config context

snmp-server trap unauthorized-ap interval

Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
snmp-server trap unauthorized-ap interval <number>
If set to 0, then traps are only sent when a rogue access point is detected. If set to >0, the entire list
of rogue access points is sent each time the interval expires.
wireless-scan
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless-scan
Enables wireless neighborhood scanning.
no wireless-scan
Disables wireless neighborhood scanning.
wireless-scan period
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless-scan period <seconds>
Specifies the interval between wireless neighborhood scans.
Parameters
<seconds>
wireless-scan url
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
wireless-scan url <location>
Sets the URL of the file that contains a list of all authorized access points.
no wireless-scan url
Deletes the URL of the file that contains a list of all authorized access points.
The format of this file is XML. Each entry in the file is composed of two items: MAC address and
SSID. Each entry should appear on a new line.
For example:
00:00:00:07:f5:11 "AP_1"
00:00:00:07:f5:23 "AP_2"
00:00:00:07:f5:12 "AP_3"
access controller shared secret
Supported on: MSM422 MSM320 MSM410 MSM310 MSM335
access controller shared secret <secret>
Sets the shared secret used to communicate with the controller.
no access controller shared secret
Sets the shared secret used to communicate with the access controller.
2-36
Scanning interval. Range: 10 - 600 seconds.