Ssid Name; Vlan; Encryption Key 1; Encryption Key Format - HP MSM3xx Reference Manual

ssid name

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
ssid name <name>
Specifies the WLAN name (SSID) for the profile.

vlan

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
vlan <id>
Assigns a VLAN ID to this VAP (VSC).
no vlan
Deletes the VLAN ID for this VAP (VSC).
Parameters
VLAN ID. Range: 1 - 4094.
<id>

encryption key 1

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
encryption key <key> <value>
Sets WEP key 1.
no encryption key <key>
Deletes WEP key 1.
Parameters
WEP key number. Range: 1 - 4. Keys 2 to 4 are only supported on the first
<key>
WLAN profile.
Key value. The number of characters you specify for a key determines the
<value>
level of encryption the AP will provide.
For 40-bit encryption, specify 5 ASCII characters or 10 HEX digits.
For 128-bit encryption, specify 13 ASCII characters or 26 HEX digits.

encryption key format

Supported on: MSM310 MSM320 MSM335 MSM410 MSM422
encryption key format (hex | ascii)
Specify the WEP key format.
Parameters
Hex keys should only include the following digits: 0-9, a-f, A-F
hex
ASCII keys are much weaker than carefully chosen hex keys. You can
ascii
include ASCII characters between 32 and 126, inclusive, in the key.
However, note that not all client stations support non-alphanumeric
characters such as spaces, punctuation, or special symbols in the key.
CLI commands
2-55