The HP M330 is a Wi-Fi Alliance authorized Wi-Fi CERTIFIED
802.11a/b/g/n/ac product. The Wi-Fi CERTIFIED Logo is a
certification mark of the Wi-Fi Alliance.
This guide shows you how to install and get started using the HP M330 Dual Radio 802.11ac Access Point, hereafter referred to as the M330. (See Products list on
page 6 for part numbers.)
The latest documentation, including the HP M330 Dual Radio 802.11ac Access Point Configuration/Administration Guide, is available at
www.hp.com/support/manuals.
The M330 Access Point is an IEEE 802.11a/b/g/n/ac, dual-radio, high-speed access point (AP) that provides simplified wireless LAN administration with clustering
technology.
Hardware overview
1
Front-top view
1: Power jack
2: LAN port
Package contents
The M330 AP, four mounting screws with wall anchors, four rubber feet,
mounting bracket, two T-bar clips, AC/DC power adaper, and documentation.
Ports
One Gigabit Ethernet port: Auto-sensing 10/100/1000. Supports powering of
the M330 with 802.3af Power over Ethernet (PoE) or 802.3at PoE+.
HP M330 Dual Radio 802.11ac Access Point Quick Start Guide
3
2
3: Reset button
In
4
5
Front-bottom view
4: Power LED
5: LAN port LED
Radio and antennas
The M330 provides dual radios (2.4 GHz and 5 GHz) with three antennas per
radio supporting 3x3 MIMO three-spatial-stream 802.11n and 802.11ac. The
M330 supports 802.11b/g/n operation modes at 2.4 GHz and 802.11a/n/ac
operation modes at 5 GHz. The M330 supports concurrent operation at 2.4 GHz
and 5 GHz.
6
7
6: 2.4 GHz LED
7: 5 GHz LED