Command Prompts; Screen Simulations - HP ProCurve 420 Management And Configuration Manual

Italics indicate variables for which you must supply a value when
■
executing the command. For example, in this command syntax,
<host_ip_address | host_name > indicates that you must provide an IP
address or a host name:
Syntax: radius-server address [secondary] <host_ip_address | host_name>

Command Prompts

In the default configuration, your access point displays the following CLI
prompt:
HP ProCurve Access Point 420#
To simplify recognition, this guide uses HP420 to represent command
prompt. For example:
HP420#
(You can use the prompt command to change the text in the CLI prompt.)

Screen Simulations

Figures containing simulated screen text and command output look like this:
HP420#show version
Version v2.0.38.0B027
HP420#
Figure 1-1. Example of a Figure Showing a Simulated Screen
In some cases, brief command-output sequences appear outside of a num­
bered figure. For example:
HP420(if-ethernet)#ip address 192.168.1.2 255.255.255.0
192.168.1.253
HP420(if-ethernet)#dns primary-server 192.168.1.55
Getting Started
Conventions
1-3