Table 2-59 Supported Features - NEC Univerge SV8100 Features And Specifications Manual

UNIVERGE SV8100
Program 10-46-01 must be set to 1 (Auto) or 2 (Manual) for Multiple Logon to work.

When three ports are assigned the same Personal ID index in Program 15-05-27, if

Program 15-05-26 is not set for those ports, the terminal types will be assigned based on
order of login. If Program 15-05-26 is set, the login order does not matter and they will
assign the correct port.
Flash (Recall) Key can be place on Line Key (Version 4000 or higher software required).

The door strike relay can be activated from a MH240 terminal by a Flash Key assigned to a

line key in Program 15-07 (751: 62) (Version 4000 or higher software required).
For any incoming call (internal or external), only one MH240 wireless handset can be

assigned to ring for the incoming call.
NAT or NAPT is only supported on the DT700 series phones. NAT or NAPT is not

supported on the ML440, MH240, the Wireless DECT (SIP), SP310 or third party SIP
phones.
Refer to

Table 2-59 Supported Features

SV8100 Feature Name
Account Code – Forced/Verified/
Unverified
Account Code Entry
Alarm
Alarm Reports
Alphanumeric Display
Analog Communications Interface (ACI)
Ancillary Device Connection
Answer Hold
Answer Key
Attendant Call Queuing
Automatic Call Distribution (ACD)
Automatic Release
Automatic Route Selection
Background Music
Barge-In
MH240 Wireless IP Telephone
for the SV8100 features supported on the MH240.
Table 2-59 Supported Features
Not
Supported
Supported
X
X
X
X
X
X
X
X
X
Account Code key in 15-07 (50) is not
supported on first release
Account Code key in 15-07 (50) is not
supported on first release
X
X
X
X
X
X
Issue 11.0
Remarks
2 - 1019