NEC Univerge SV8100 Features And Specifications Manual page 691

UNIVERGE SV8100
Program
Program Name
Number
11-11-21 Service Code Setup (for Setup/
Entry Operation) – Check
Incoming Ring Tones
11-11-22 Service Code Setup (for Setup/
Entry Operation) – Extension
Name Programming
11-11-23 Service Code Setup (for Setup/
Entry Operation) – Second Call
for DID/DISA/DIL
11-11-24 Service Code Setup (for Setup/
Entry Operation) – Change
Station Class of Service
11-11-25 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Setup for Each
Extension Group
11-11-26 Service Code Setup (for Setup/
Entry Operation) – Automatic
Transfer Cancellation for Each
Extension Group
11-11-27 Service Code Setup (for Setup/
Entry Operation) – Destination of
Automatic Transfer Each
Extension Group
11-11-28 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer for Every Extension
Group
11-11-29 Service Code Setup (for Setup/
Entry Operation) – Delayed
Transfer Cancellation for Each
Extension Group
11-11-30 Service Code Setup (for Setup/
Entry Operation) – DND Setup
for Each Extension Group
11-11-31 Service Code Setup (for Setup/
Entry Operation) – DND
Cancellation for Each Extension
Group
11-11-33 Service Code Setup (for Setup/
Entry Operation) – Dial Block
Flexible System Numbering
Description/Comments
Check incoming ring tones used
for registration and setup.
Customize the Extension name
programming used for registration
and setup.
Customize the second call of DID/
DISA/DIL used for registration and
setup.
Allow an extension user to change
the COS of another extension.
Must be allowed in Program
20-13-28.
Customize the service code used
to set the Automatic Trunk
Forwarding feature for a
Department Group.
Customize the service code used
to cancel the Automatic Trunk
Forwarding feature for a
Department Group.
Customize the service code used
to set the destination for the
Automatic Trunk Forwarding
feature for a Department Group.
Customize the delayed transfer for
every extension group used for
registration and setup.
Customize the delayed transfer
cancellation for each extension
group used for registration and
setup.
Customize the Service Codes
which are used for registration and
setup.
Customize the DND cancellation
for each extension group used for
registration and setup.
Customize the dial block used for
registration and setup.
Assigned Data
1
MLT
(default = 711)
MLT
(default = 700)
MLT
(default = 679)
MLT
(default = 677)
MLT, SLT
(default = 602)
MLT, SLT
(default = 603)
MLT
(default = 604)
MLT, SLT
(default = 605)
MLT, SLT
(default = 606)
MLT, SLT
(default = 607)
MLT, SLT
(default = 608)
MLT, SLT
(default = 600)
Issue 11.0
Level
2 3












2 - 659