NEC Univerge SV8100 Features And Specifications Manual page 560

Issue 11.0
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-02 ETU Setup (DLCA PKG Setup) –
Logical Port Number (B1)
10-03-04 ETU Setup (DLCA PKG Setup) –
Optional Installed Unit 1 (Only
Applies to DTH/DTR telephones)
10-03-05 ETU Setup (DLCA PKG Setup) –
Optional Installed Unit 2
2 - 528
Description/Comments
Set up and confirm the Basic
Configuration data for logical port
number (B1).
Set up and confirm the Basic
Configuration data for optional
installed Unit 1.
Set up and confirm the Basic
Configuration data for optional
installed Unit 2.
UNIVERGE SV8100
Assigned Data
1
0 = Not set
1 = Multiline Terminal
(1~256)
2 = SLT Adapter
(1~256)
6 = PGD(2)-U10 ADP
(Paging) (1~8)
7 = PGD(2)-U10 ADP
(for Tone Ringer) (1~8)
8 = PGD(2)-U10 ADP
(for Door Box) (1~8)
9 = PGD(2)-U10 ADP
(for ACI) (1~96)
10 = DSS (1~32)
11 = -- Not Used --
(default = 0)
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
(default = 0)
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
(default = 0)
term
D Cordless II Terminal
Level
2 3


