NEC Univerge SV8100 Features And Specifications Manual page 952

Issue 11.0
Program
Program Name
Number
11-02-01 Extension Numbering
11-07-01 Department Group Pilot
Numbers – Dial
15-03-03 Single Line Telephone Basic
Data Setup – Terminal Type
15-05-18 IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
16-01-01 Department Group Basic Data
Setup – Department Name
16-01-02 Department Group Basic Data
Setup – Department Calling
Cycle
2 - 920
Description/Comments
Set the extension number for the
IVR – Broadcast ports.
The extension numbers must be
assigned to unused hardware
ports to allow the IVR – Broadcast
SIP stations to register.
Assign pilot numbers to each
Department Group set up.
Enter 1 for this option to allow the
SIP Station ports to receive DTMF
tones after the initial call setup.
For Broadcast, always enter 1
(e.g., receive DTMF tones).
For a device that has one IP
address coming into it but multiple
extensions off of it. Assign all the
extensions to a group so the CPU
knows that the one IP address is
assigned to multiple extensions.
All IVR – Broadcast ports must be
assigned in a Duplication Group
that have no other system ports
assigned.
Use to assign the name for the
Department Group to be used for
the IVR – Broadcast.
Set the routing cycle for calls into
a department (i.e., when a user
dials the department pilot
number). The system can ring the
highest priority extension available
(Priority Routing, 0) or cycle in
circular order to a new idle
extension for each new call
(Circular Routing, 1).
UNIVERGE SV8100
Assigned Data
1
Up to eight digits
1 101
2 102
3 103
~ ~
99 199
100 3101
~ ~
512 3513
Up to eight digits

(default not assigned)
0 = Normal
1 = Special

(default = 0)
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5

6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
Maximum 12
characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
(default = 0)
IVR – Broadcast Server
Level
2 3


