NEC Univerge SV8100 Features And Specifications Manual page 1224

Issue 11.0
PCPro can open and convert a UX5000 database to an SV8100 database (Version 4.00

PCPro or higher is required).
Refer to the PCPro manual for programs converted.

Databases that have a PZ-ME50-US installed can not be uploaded into a system without a

PZ-ME50-US.
With Version 8000 or higher software, PCPro and WebPro have been enhanced allowing

T1/ISDN layer 1 status, System Alarms and SRAM information to be viewed. The SRAM
displays Day/Night Mode information, Trunk information (Trunk to Trunk Transfer Set/Not
Set, Trunk disabled), Read List, Department Group information (DND, Transfer settings)
and Extension information (Forwarding settings, Alarm settings, DND, BGM and more).
This feature requires Version 8000 Enhanced (0037) license and Maintenance (0043)
license.
Refer to the UNIVERGE SV8100 PC Programming Manual, Appendix L, Maintenance Features for more

details.
2 - 1192
22-07 DIL Assignment
22-11 Dial-In Conversion Table Data Setup
26-01 Automatic Route Selection Service
26-02 Dial analysis Table for ARS/LCR
26-03 ARS Dial Treatments
26-04 ARS Class of Service
26-11 Transit Network ID Table
26-12 Network Specified Parameter Table for ARS/F-Route
40-02 Mail Box Setup
44-02 Dial analysis Table for F-Route Access
44-05 F-Route Table
44-06 Additional Dial Table
UNIVERGE SV8100
PC Programming