NEC Univerge SV8100 Features And Specifications Manual page 1553

UNIVERGE SV8100
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
 The items highlighted in gray are read only and cannot be changed.
Program
Program Name
Number
10-03-01 ETU Setup (DTI (T1) PKG Setup)
– Logical Port Number
10-03-02 ETU Setup (DTI (T1) PKG Setup)
– T1 Signal Format Selection
10-03-03 ETU Setup (DTI (T1) PKG Setup)
– Zero Code Suppression
10-03-04 ETU Setup (DTI (T1) PKG Setup)
– Line Length Selection
10-03-05 ETU Setup (DTI (T1) PKG Setup)
– T1 Clock Source
T1 Trunking (with ANI/DNIS Compatibility)
Description/Comments
Set various T1 trunk options for
compatibility with the local Telco.
For ANI/DNIS, the following
settings in Program 10-03 are
recommended:
Item 02: Frame Type = 0 (D4)
Item 03: Zero Suppression = 1
(AMI/ZCS)
Item 04: Distance Between ETU
and CSU = 0 (0~133')
Item 05: Clock Select = 1 (Internal)
Item 06: DTI No. of Ports= 0 (Auto/
24), 1 (4 Ports), 2 (8 Ports), 3 (12
ports), 4 (16 ports), and 5 (20
Ports)
Set up and confirm the basic
configuration data for logical port
number T1.
Set up and confirm the basic
configuration data for the Clear
Channel Selection.
Set up and confirm the basic
configuration data for the Line
Length Selection.
Set up and confirm the basic
configuration data for the DTI
trunk type assignment.
Assigned Data
1
The start port number
of a T1 line is
displayed, and 24 logic
ports are automatically
assigned to a DTI (T1)
line.
0~200

(default = 0)
0 = D4 (12 Multi
Frame)

1 = ESF (24 Multi
Frame)
(default = 1)
0 = B8ZS

1 = AMI/ZCS
(default = 0)
0 = 0 feet~133 feet
1 = 133 feet~266 feet
2 = 266 feet~399 feet

3 = 399 feet~533 feet
4 = 533 feet~655 feet
(default = 0)
0 = Internal

1 = External
(default = 1)
Issue 11.0
Level
2 3
2 - 1521