NEC Univerge SV8100 Features And Specifications Manual page 872

Issue 11.0
Program
Program Name
Number
10-30-03 SIP Authentication Information –
Password
10-30-04 SIP Authentication Information –
Authentication Trial
10-36-01 SIP Trunk Registration
Information Setup – Registration
10-36-02 SIP Trunk Registration
Information Setup – User ID
10-36-03 SIP Trunk Registration
Information Setup –
Authentication User ID
10-36-04 SIP Trunk Registration
Information Setup –
Authentication Password
10-37-01 UPnP Setup – UPnP Mode
10-37-02 UPnP Setup – Retry Time
10-40-01 IP Trunk Availability – IP Trunk
Availability
10-40-02 IP Trunk Availability – Number of
Ports
2 - 840
Description/Comments
Enter the authentication password
provided by the SIP carrier. When
the UNIVERGE SV8100 registers
its own ID with the carrier SIP
server or makes an outgoing call
via the carrier SIP server, the SIP
server requests the authentication.
This data is used as Register ID 0.
Define the Authentication Trial.
When a call tries to register with
the SIP carrier and they refuse,
this entry determines how many
times the UNIVERGE SV8100
sends authentication.
Enable/Disable the SIP trunk
registration.
Define the USER ID for the SIP
Trunk.
Define the Authentication USER
ID for the SIP Trunk.
Define the Authentication
Password for the SIP Trunk.
Enable/Disable UPnP.
Define the retry time for UPnP.
Enable/Disable IP Trunks.
Define the number of IP Trunks
when enabled.
IP Trunk – (SIP) Session Initiation Protocol
UNIVERGE SV8100
Assigned Data
1
Up to 32 Characters
(default not assigned)

0~9
(default = 1)

0 = Disable

1 = Enable
(default = 0)
Up to 32 Characters.

(default not assigned)
Up to 64 Characters.

(default not assigned)
Up to 32 Characters.
(default not assigned)
0 = Disable

1 = Enable
(default = 0)
0,60~3600

(1~59 cannot be input)
(default = 60)
0 = Disable

1 = Enable
(default = 0)
0~128

(default = 0)
Level
2 3
