NEC Univerge SV8100 Features And Specifications Manual page 944

Hide thumbs Also See for Univerge SV8100:
Table of Contents

Advertisement

Issue 11.0
Program
Program Name
Number
11-02-01
Extension Numbering
11-07-01
Department Group Pilot
Numbers – Dial
15-03-03
Single Line Telephone Basic
Data Setup – Terminal Type
15-05-18
IP Telephone Terminal Basic
Data Setup – IP Duplication
Allowed Group
16-01-01
Department Group Basic Data
Setup – Department Name
16-01-02
Department Group Basic Data
Setup – Department Calling
Cycle
2 - 912
Description/Comments
Set the extension number for the
Appointment Reminder ports.
The extension numbers must be
assigned to unused hardware
ports to allow the Appointment
Reminder SIP stations to register.
Assign pilot numbers to each
Department Group set up.
Enter 1 for this option to allow the
SIP Station ports to receive DTMF
tones after the initial call setup.
For the Appointment Reminder,
always enter 1 (e.g., receive
DTMF tones).
For a device that has one IP
address coming into it but multiple
extensions off of it. Assign all the
extensions to a group so the CPU
knows that the one IP address is
assigned to multiple extensions.
All Appointment Reminder ports
must be assigned in a Duplication
Group that have no other system
ports assigned.
Use to assign the name for the
Department Group to be used for
the Appointment Reminder.
Set the routing cycle for calls into
a department (i.e., when a user
dials the department pilot
number). The system can ring the
highest priority extension available
(Priority Routing, 0) or cycle in
circular order to a new idle
extension for each new call
(Circular Routing, 1).
UNIVERGE SV8100
Assigned Data
Up to eight digits
1
101
2
102
3
103
~
~
99
199
100 3101
~
~
512 3513
Up to eight digits
(default not assigned)
0 = Normal
1 = Special
(default = 0)
0 = Not Used
1 = Group 1
2 = Group 2
3 = Group 3
4 = Group 4
5 = Group 5
6 = Group 6
7 = Group 7
8 = Group 8
9 = Group 9
10 = Group 10
(default = 0)
Maximum 12
characters
(default not assigned)
0 = Normal Routing
(Priority)
1 = Easy – UCD
Routing (Circular)
(default = 0)
IVR – Appointment Reminder Server
Level
1
2
3

Advertisement

Table of Contents
loading

Table of Contents