NEC Univerge SV8100 Features And Specifications Manual page 687

UNIVERGE SV8100
Program
Program Name
Number
11-04-01 Virtual Extension Numbering
11-06-01 ACI Extension Numbering
11-07-01 Department Group Pilot
Numbers – Dial
11-08-01 ACI Group Pilot Number – Dial
11-09-01 Trunk Access Code
11-09-02 Trunk Access Code – 2nd Trunk
Route Access Code
11-10-01 Service Code Setup (for System
Administrator) – Night Mode
Switching
11-10-03 Service Code Setup (for System
Administrator) – Setting the
System Time
11-10-04 Service Code Setup (for System
Administrator) – Storing
Common Speed Dialing
Numbers
11-10-05 Service Code Setup (for System
Administrator) – Storing Group
Speed Dialing Numbers
11-10-06 Service Code Setup (for System
Administrator) – Setting the
Automatic Transfer for Each
Trunk Line
Flexible System Numbering
Description/Comments
Assign virtual extension numbers.
Define the virtual extension
number to be used for the ACI
extension numbering.
Assign pilot numbers to each
Department Group set up.
Assign the pilot number to the ACI
Groups set in Program 33-02.
If required, change the single-digit
Trunk Access Code (normally 9). If
you change this code, you must
also review the settings in
Program 11-01-01 for the new
code selected.
Assign the Service Code set up in
Program 11-01-01 for Alternate
Trunk Route Access.
Customize the night mode
switching Service Codes for the
System Administrator.
Customize the system time
Service Codes for the System
Administrator.
Store common speed dialing
Service Codes for the System
Administrator.
Store group speed dialing
numbers for the System
Administrator.
Set the service code for setting
automatic transfer for each trunk
line.
Assigned Data
1
Up to eight digits
1 201
2 202
3 203
~ ~ 
99 299
100 3601
~ ~
256 3857
ACI Ports: 1~96
(default not assigned)
Up to eight digits

(default not assigned)
Up to eight digits
ACI Groups: 1~16
(default not assigned)
Dial (up to four digits)
(default = 9)
Dial (up to four digits)
[default not assigned)]
MLT,SLT
(default = 718)
MLT
(default = 728)
MLT
(default = 753)
MLT
(default = 754)
MLT
(default = 733)
Issue 11.0
Level
2 3









2 - 655