NEC Univerge SV8100 Features And Specifications Manual page 1302

Issue 11.0
Related Features
Automatic Route Selection
Central Office Calls, Placing
Dial Tone Detection
Last Number Redial
Programmable Function Keys
Repeat Redial
Guide to Feature Programming
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned when programming
this feature in the order they are most commonly used. These levels are used with PCPro and WebPro
wizards for feature programming.
Level 1 – these are the most commonly assigned programs for this feature.

Level 2 – these are the next most commonly assigned programs for this feature.

Level 3 – these programs are not often assigned and require an expert level working knowledge of

the system to be properly assigned.
Program
Program Name
Number
11-12-13 Service Code Setup (for Service
Access) – Saved Number Dial
11-12-18 Service Code Setup (for Service
Access) – Clear Saved Number
Dialing Data
15-07-01 Programmable Function Keys
2 - 1270
Description/Comments
Customize the service code used
for dialing a saved number.
Define the service code for Clear
Save Number Dialing List if it is
not acceptable.
Assign a function key as a Save
key (code 30).
UNIVERGE SV8100
Assigned Data
1
MLT, SLT
(default = 715)
MLT, SLT
(default = 785)
Line Key 1~48
0~99 (Normal Function
Code 751 by default)

 
00 ~ 99
(Appearance Function
Code) (Service Code
752 by default)
Save Number Dialed
Level
2 3

