NEC Univerge SV8100 Features And Specifications Manual page 1300

Issue 11.0
2. Dial the number of extension you want to monitor.
You can place and answer other calls while Room Monitor is active.

To activate Room Monitor from an idle Multiline Terminal (extension to be monitored):
1. Press Room Monitor key (Program 15-07 or SC 751: 39).
2. Dial the number of the extension where you are located.
For example, if you are at extension 106, dial 106.

You can place and answer other calls while Room Monitor is active.

To cancel Room Monitor (at either extension):
1. Press the Room Monitor key at both the initiating extension and the monitored extension.
Single Line Telephones:
To activate Room Monitor (at the initiating extension):
1. Lift the handset at the telephone which is monitoring another telephone.
2. Dial 675.
3. Dial 2.
4. Dial number of extension number, which will be monitored.
You cannot place or answer other calls while Room Monitor is active.

To activate Room Monitor (at the extension to be monitored):
1. Lift the handset at the telephone to be monitored.
2. Dial 675.
3. Dial 1.
4. Dial number of the extension number, which is monitoring the telephone.
5. Place the handset on the desk, placing the handset transmitter towards the room.
You cannot place or answer other calls while Room Monitor is active.

To cancel Room Monitor (at either extension):
1. Hang up the handsets for both the monitored and the monitoring telephones.
2 - 1268
UNIVERGE SV8100
Room Monitor