NEC Univerge SV8100 Features And Specifications Manual page 1104

Issue 11.0
Program
Program Name
Number
15-22-04 Mobile Extension Setup – Call
Back
20-01-16 System Options – Mobile
Extension Callback Duration
Time
20-31-24 Timer Class Timer Assignment –
Answer Time from Mobile
Extension
20-31-25 Timer Class Timer Assignment –
Mobile Extension Callback
Duration Time
22-01-12 System Options for Incoming
Calls – Mobile Extension Answer
Time
Operation
With any feature, if the Mobile Extension user presses *, an existing call is placed in hold. Pressing * a
second time or the timeout of the inter-digit timer returns the call to conversation mode.
Using Analog Lines with the Mobile Extension:
Analog lines can be used for integration with the Mobile Extension using either DILs or VRS Auto
Attendant to access the Mobile Extension Proxy Port. However, it must be noted that the *0 Hang Up
code must be used prior to terminating any call (e.g., transfer, hang up etc.) as analog trunks do not
provide Disconnect Supervision.
Placing an Intercom Call to a Mobile Extension:
1. Lift the handset or press SPK.
2. Dial the extension number assigned to the Mobile Extension.
If the Mobile Extension is turned off, incoming callers hear a message indicating the user is not
available. The setting in the DTMF Confirmation programming (Program 15-22-02) determines
how the call is handled.
2 - 1072
Description/Comments
Select whether or not the system
will try to call back a mobile
extension user.
Determines the amount of time the
system will call back a mobile
extension user before abandoning
the call.
This program defines the data
corresponding to Program
22-01-12. Refer to Timer Class for
Extension.
This program defines the data
corresponding to Program
22-01-12. Refer to Timer Class for
Extension.
Determines the amount of time
before the mobile extension will
answer with internal dial tone.
Extend this timer long enough for
1 ring cycle to complete, giving the
mobile extension user time to
hang up and wait for callback.
UNIVERGE SV8100
Assigned Data
1
0 = Don't call back
1 = Call back
(default = 0)
1~64800 seconds
(default = 15 seconds)
0 = Immediate Answer
1~64800 seconds
(default = 3 seconds)
1~64800 seconds
(default = 15 seconds)
1~64800 seconds
(default = 3 seconds)

Mobile Extension
Level
2 3



