Paging, External (Vrs) - NEC Univerge SV8100 Features And Specifications Manual

Hide thumbs Also See for Univerge SV8100:

Table of Contents

UNIVERGE SV8100

Enhancements

This feature added with Version 5000.

Paging, External (VRS) enables the use of prerecorded VRS messages for External Paging. The

advantage of this feature is saving time for the users who regularly use External Paging with the same

announcements.

If VRS External Paging is answered using the meet me paging service code and both

parties are connected, VRS stops the announcement.

Paging, External (VRS) does not support Internal Paging. Also, combined paging is not

The paging telephone must remain off-hook during paging. If the paging telephone hangs

up during paging, VRS External paging stops.

If an invalid VRS number is dialed or, there is no recorded VRS greeting, the caller hears an

Paging, External (VRS) will not play the starting and ending tone if enabled. If the starting

and ending tones are needed, they must be recorded in the VRS message itself.

After the recorded VRS message is finished, the paging telephone hears a busy tone.

When using the speaker mode on a paging telephone, the telephone becomes idle after the

recorded VRS message finishes.

The Paging, External (VRS) feature requires Version 5000 or higher software and the

Version 5000 Enhancement license.

The Paging, External (VRS) feature is supported with Embedded VRS.

Default Setting

Paging, External (VRS)

Table of Contents